5 / 47
SPECIFICATIONS
Hydraulic pumps:
Load hoist, boom hoist, and propel
2 piston pumps, max flow rate
67.3 US gal/min x 2 (255
l
/min x 2)
Swing
1 piston pump, max flow rate
46.7 US gal/min (177
l
/min)
Control system and auxiliary
2 Gear pumps, max flow rate
16.3 US gal/min + 10.6 US gal (61.6
l
/min + 40.5
l
/min)
Brake cooling system
2 gear pumps, max flow rate
19.4 US gal/min x 2 (73.5
l
/min x 2)
3
Operators cab
Totally enclosed from weather, this full-vision cab has safety glass all around.
The adjustable, high-backed seat with armrest is capable of adjustment with or
without the control console. Auxiliary controls and instruments are on a side
mounted console. A signal horn, windshield wipers, air conditioner/heater, and
swing limiter are all standard features.
Controls
At the operator’s right are console-mounted adjustable short levers for the front
and rear drum and the boom hoist control. Fine inching control and free fall
activation switches are built in to the levers. Beside the seat on the right are two
short levers for propel control, plus individual speed dial controls for front, rear,
and boom drums. At the left is the console mounted swing lever, an optional
3rd drum control, switches for the front, rear, and boom drum pawls, and the
engine start/stop key. A swing brake control switch and signal horn button are
on the swing lever.
Counterweight and Carbody weight
Counterweight Base
1 x 25,600 (11,600 kg)
Counterweight (R)
2 x 12,680 (5,750 kg)
Counterweight (L)
2 x 12,680 (5,750 kg)
Total Counterweight 7
6,320 (34,600 kg)
Carbody weight
2 x 7,320 (3,320 kg)
Total Carbody weight
14,640 (6,640 kg)
Gantry
This high folding type gantry is fitted with a sheave frame for boom reeving.
Hydraulic lift is standard. It provides full up, full down positions with
linkage.
Hydraulic system
Maximum pressure rating
4,626 psi (31.9MPa)
Cooling
Oil to air heat exchanger
Filtration
Full flow filters with replaceable
paper elements
Reservoir capacity
121.5 US gal. (460 liters)
Swing:
Swing unit
Hydraulic motor driving spur gears through planetary reducers to output
swing pinion for 360 degree rotation.
Swing brake
Spring set hydraulically released multiple disk brake mounted on swing motor.
Swing circle
Single row ball bearing with an integral internally cut swing gear.
Swing lock
Manual, 4 position lock for transportation.
Self Lifting Device - Standard Equipment