Background Image
Previous Page  3 / 38 Next Page
Information
Show Menu
Previous Page 3 / 38 Next Page
Page Background

SPECIFICATIONS

Type

Crawler mounted, Lattice boom, Hydraulic controlled

Maximum lift capacity

220,000 lbs (99,800 kg) @ 11’ operating radius (40’ boom)

Basic boom length

40’ (12.2 m)

Maximum boom length

200’ (61.0 m)

Basic boom & jib length

80’ + 30’ (24.4 m + 9.1 m)

Maximum boom & jib length

190’ + 60’ (57.9 m + 18.3 m)

Working weight

Approx. 198,500 lbs (90,050 kg)

Ground bearing pressure

Approx. 12.9 psi (88.9 kPa)

Gradeability

40%

Calculations to determine working weight, ground bearing pressure, and gradeability include the weight of the upper and

lower works of the crane, counterweights, and carbody weights, 40’ boom.

General Description

2

General Dimensions

Height to top of gantry (lowered)

10’10” (3.31 m)

Width of upper machine w/operator‘s cab

9’10” (2.99 m)*

Radius of rear end (counterweights)

15’5” (4.70 m)

Counterweight ground clearance

3’8” (1.12 m)

Center of rotation to boom foot pin

3’7” (1.10 m)

Height from ground to boom foot pin

5’10” (1.77 m)

Height over gantry (raised)

20’4” (6.19 m)

Overall length of crawlers

20’7” (6.28 m)

Overall width of crawlers

17’2” (5.24 m)

Center to center, idler to sprocket

17’10” (5.44 m)

Shoe width

36” (0.91 m)

Ground clearance of body

15” (0.39 m)

Working Speed

Hoist line speed (front and rear drums)

390 ~ 10 ft/min (120 ~ 3 m/min)

Lowering line speed (front and rear drums)

390 ~ 10 ft/min (120 ~ 3 m/min)

Boom hoist line speed (front and rear drums)

230 ~ 6.6 ft/min (70 ~ 2 m/min)

Boom lowering line speed (front and rear drums)

230 ~ 6.6 ft/min (70 ~ 2 m/min)

Swing speed (max.)

4.0 rpm

Travel speed (high/low)

1.07/0.71 mph (1.7/1.1 km/h)

Line speed based on single line, no load, and first layer of rope on the

drum.

Power Plant:

Diesel engine - make and model

Hino J08E-VV

(Tier 4 Final)

No. of cylinders

6

Bore X stroke

112 mm x 130 mm

Cycles

4

Total displacement

469 cu.in. (7.684

l

)

Rated output SAE GROSS

285 HP / 2,100 rpm (213 kW / 2,100 min

-1

)

Maximum torque

750 lbs-ft / 1,600 rpm (1,017 Nm / 1,600 min

-1

)

Starter

24 Volts / 5.0 kW

Alternator

24 Volts / 90 Amp

Batteries

Two 12 volt, 136 AH/5 HR capacity series connected.

Radiator

Corrugated type core, thermostatically controlled, with cleanout screen.

Throttle

Twist grip type hand throttle, electrically controlled, in conjunction with floor mounted pedal.

Air cleaner

Dry type with replaceable paper element.

Fuel tank capacity

106 US gal. (400 liters)

Lube oil filters

Full flow and by-pass type with element cartridge type.

Fuel filter

Replaceable cartridge element.

Upper Machinery

* - 10’5” wide with Catwalks on cab side only.

11’ wide with Catwalks on both sides.